Discover the advantages of a variable speed pump

Variable speed pump or VSTD

A variable speed pump is a multi-speed pump that operates at low flow and low speed. This method of operation increases the performance of your filtration system while reducing power consumption. Simply set the variable speed pump at the right level to have a reduced flow rate and very low power consumption in various circumstances: when the pool is not in use, when the outside temperature is average, when the filter is not filled with impurities, etc.

The importance of varying the filtration speed of your pool

The factors we have just listed contribute to the variation of the filtration speed: no swimmers in the pool, average temperature of the water and of the outside environment, clean filter and clean water, etc. If the pool water is clean, it is advisable to regulate the filtration and filter flow to a reduced level. This lower flow rate makes it easy to recover debris from the water. If the outside temperature is lower, it is advisable to set the filtration flow rate to a low level. This reduced flow rate will maintain the proper chemical composition of the water. If, on the other hand, you are planning a shock treatment (because the number of bathers and the temperature are too high, or if the filter is not clean), it is recommended to set the flow rate at a high level. It is the same if you do not use the pool's broom socket with the hydraulic robot, or if you use another device with the filtration system (booster, heat pump, etc.) The backwash will be effective thanks to this high flow rate. This high flow rate will easily and quickly remove impurities in the filtration system.

Traditional pump (two-speed) and variable speed pump: the differences

The optimization of your filtration, is the big difference between these two types of pumps. However, this optimization depends on the use of the pump and climatic factors. The variable speed pump offers a longer life compared to a traditional pump. Thanks to the lower variable speed, the pump components do not deteriorate quickly and the unit does not heat up. However, when the weather is bad, you should always expect this kind of surprise. The cleanliness of the water is guaranteed since it circulates permanently, especially when the treatment system (chlorine or ph regulator, UV system, salt water chlorinator) or automatic heating system (heat pump, solar heating, resistance heater) is running continuously. The fact that the variable speed pump operates at idle speed prevents a deafening noise. It is therefore a quiet and reliable device. Compared to a traditional pump, the variable speed pump offers great savings in electricity, reaching 35 to 85% depending on the type of pond, filtration system equipment and weather conditions.

What about environmental compliance?

The variable speed pump makes a significant contribution to the preservation of the environment because it uses less electricity. The more it optimizes the filtration system, the more it protects the environment against pollution. In addition to this the reduced use of chemical products because the cleanliness and stability of the water are already there.

To conclude

If you are looking for a new pump, trust the variable speed pump, which is a safe and profitable investment than a traditional pump. You will see your factors and chemicals reduced to the lowest possible level. On that note, I wish you a wonderful and unforgettable summer, with your feet in the water!

Jade